Faux French Doors for $13—No Power Tools Needed!
If you’ve ever looked at your builder-grade sliding glass doors and thought, “There has to be a way to make these look cuter,”—this one’s for you.
I recently gave ours a high-end, custom look using nothing but vinyl tape, a little Frog Tape, and a measuring tape. No drills, no power tools, no stress. And the best part? It cost me under $13. Yep—just thirteen bucks for a whole new vibe. (I already had the Frog Tape and the tape measure at home.)
Materials You’ll Need:
Before:
AFTER:
WATCH THE VIDEO HERE.
Step 1: Clean the Glass
Start with a clean surface. I used a basic glass cleaner and a lint-free cloth to make sure there was no dust or smudges that could interfere with the tape sticking.
Step 2: Measure & Mark the Center
I measured the width of each door panel and used Frog Tape to mark the center. This helped keep everything lined up as I worked.
Step 3: Divide into Thirds
Next, I divided each side into three vertical sections. Don’t stress over perfection—just eyeball it and aim to keep the spacing consistent. Once you do one door, I just used the tape to follow it along to the other doors. Mine are about 30-31″ apart between each.
Step 4: Apply the Tape
Now the fun part—tape time! I applied the vinyl tape vertically first, then added the horizontal lines to create that classic French door grid. I trimmed the edges with scissors, but you could use a utility knife if you want really crisp cuts.
Final Thoughts:
Total transformation. What once looked plain and builder-grade now gives off cozy, designer vibes. It instantly elevated the space—and took less than an hour from start to finish.
If you’re looking for a quick win with big visual impact, this is it. Perfect for renters, busy moms, or anyone wanting to upgrade their space on a budget—no toolbox required.
Pin this for later, and let me know if you try it!
Follow along for more simple DIY tips, home inspiration, and budget-friendly finds. Let’s make your home feel like you!
